DIGITEN Water Flow Control Meter LCD Display Controller+G1 2 Water Hall Sensor Flow Meter Flowmeter Counter 1-30L min+G1 2 Solenoid Valve Normally Closed N C+DC 12V Power Adapter - OLSLKX2F

DIGITEN Water Flow Control Meter LCD Display Controller+G1 2" Water Hall Sensor Flow Meter Flowmeter Counter 1-30L min+G1 2" Solenoid Valve Normally Closed N C+DC 12V Power Adapter - OLSLKX2F

£52.38 £84.79
Availability: In Stock
Product Code: OLSLKX2F

Available Options

+

  • ★【Large LCD Screen】: Support reading with Liter or Gallon unit, LPM/GPM switchable. DFC15 will display the flow rate(the REAL-TIME volume of liquid which passes per minute), the flow total volume and sensed temperature clearly.

  • ★【Quantiative Control】: The controller will turn off the solenoid valve automatically when flow reach to the setting value you desire, it's easy to install and control.

  • ★【Work with All Hall Effect Flow Sensor】: It can work with various different flow sensors through adjust the K value. Come with temperature sensor, it can measure liquid temperature.

  • ★【Wide Applications】: Swiming Pool, water dispenser, coffee machine, drip irrigation system, beer brewing, etc.

  • ★【Package Includes】: The controller will come with G1/2" flow sensor, G1/2" solenoid valve(N/C), temperature sensor(it can measure liquid temperature) and 12VDC power adapter.

  • TECHNICAL SPECIFICATIONS
    For DFC15 Controller:
    Controller Power Requirement: 12VDC
    Power Adapter: Input: 100-240VAC; Output: 12VDC, max 2A
    Adapter lead length: 1m
    Measuring Accuracy: ±1%
    Output for Solenoid valve: 12VDC, max 5A
    Temperature Sensor: 0-125℃/32-257℉, NTC3950, Accuracy: ±1℃/±1℉ thread: M8
    Max Total Volume : 999999 G/L
    Quantitative Range: 0-9999.99 G/L
    Flow Rate Range: 0-9999.99/LPM(GPM)
    Cable Length : 1m
    Dimensions: 88mmx126mmx30mm
    Weight: 200g
    Operation Environment: Temperature: 0-50℃/32-122℉; Relative Humidity: <85%

    For G1/2" Flow Sensor:
    Flow range:1-30L/min
    Allow compression:Water pressure 1.75 Mpa below
    Sensor:Hall effect
    Cable length:15cm.
    Error: ± 2%

    For G1/2" Solenoid Valve:
    Working pressure:0.02-0.8Mpa
    Operation mode:N/C,normally closed.

    How to work:
    1. Set K value, quantitative value, max alarm value, properly install the flow sensor and solenoid valve.
    2. Press the RUN/STOP button, the controller works, total will continuously display the current flow volume, and current flow rate, and the faucet will start animated display.
    3. When the flow reaches the quantitative setting value, the controller turn off the solenoid valve automatically, and the total value stop, faucet animation will be stopped dropping, flow rate back to zero.
    4. Pressthe RUN/STOP buton again and the controller will repeat the same job.

    Note:
    1, This controller work with the solenoid valve up to 5A, but this kit come with 2A power adapter. If drive a large solenoid valve, please use suitable power adapter.
    2, Ensure the solenoid valve and flow sensor direction is the same with water flow.
    3, Avoid the water into the controller.

    Package includes:
    1 x DFC15 controller
    1 x G1/2" flow sensor
    1 x G1/2" solenoid valve
    1 x Power adapter
    1 x Temperature sensor
    1 x Manual

    DIGITEN Water Flow Control Meter LCD Display Controller+G1 2" Water Hall Sensor Flow Meter Flowmeter Counter 1-30L min+G1 2" Solenoid Valve Normally Closed N C+DC 12V Power Adapter - OLSLKX2F